EVCO c-pro nano NAV - Manual (Page 16)

C-PRO NANO AND MICRO NAV APPLICATION MANUAL
Page 16
- Salt water pump icon: identifies the status of the selected unit pump.
o UNIT: If on the pump is functioning, if flashing fast it signals that timing is active.
- Alarm icon: Identifies the presence or not of alarms.
If on, alarms are present in at least one of the units, otherwise it remains off. Flashing
signals the presence of a new alarm not yet displayed. The icon flashes if there are alarms
when the machine is off.
- Icon 1: When displaying the master it indicates the status of the salt water pump and of the
unit compressor: if timing is in progress, before switch-on of the salt water pump it flashes
slowly. If compressor timing is in progress it flashes quickly, if the compressor is running it
remains on. When displaying the alarms it shows whether the unit is in alarm. When
displaying the slave it flashes to indicate that the information linked to the first network unit
is being displayed.
- Icon 2: When displaying the master it indicates the status of the salt water pump and of the
unit compressor: if timing is in progress, before switch-on of the salt water pump it flashes
slowly. If compressor timing is in progress it flashes quickly, if the compressor is running it
remains on. When displaying the alarms it shows whether the unit is in alarm. When
displaying the slave it flashes to indicate that the information linked to the second network
unit is being displayed.
-
Icon 3: When displaying the master it indicates the status of the salt water pump and of the
unit compressor: if timing is in progress, before switch-on of the salt water pump it flashes
slowly. If compressor timing is in progress it flashes quickly, if the compressor is running it
remains on. When displaying the alarms it shows whether the unit is in alarm. When
displaying the slave it flashes to indicate that the information linked to the third network unit
is being displayed.
- Icon 4: When displaying the master it indicates the status of the salt water pump and of the
unit compressor: if timing is in progress, before switch-on of the salt water pump it flashes
slowly. If compressor timing is in progress it flashes quickly, if the compressor is running it
remains on. When displaying the alarms it shows whether the unit is in alarm. When
displaying the slave it flashes to indicate that the information linked to the fourth network
unit is being displayed.
-
Stand-by icon: associated to the ESC key, it identifies the status of the machine:
Off: machine on
On: machine off
- °C/°F icon: indicates the unit of measurement of the temperature displayed by the probes