EVCO EVX815P7 Installer manual - Manual (Page 58)

EVCO S.p.A. EVX 800 range | Installer manual ver. 1.2 | Code 144X800E124
page 58 of 66
For further information, consult the documentation relative to RICS and EVUSBREC01.
13.3 EVPROG01 connection kit
13.3.1 Introduction
EVPROG01 is a connection kit.
The kit can be used to connect the device to the Parameters Manager set-up software system.
The kit is made up from the following parts:
- non-optoisolated RS-232/TTL serial interface EVIF20TRX
- 1256800042 telephone cable
- 1256800079 adapter
The kit can be used as a powered or non-powered device. In the latter case, the EVPS power supplier must also be
used (to be ordered separately).
13.3.2 Description
The following drawing illustrates the aspect of EVPROG01.