EVCO EVX815P7 Installer manual - Manual (Page 31)

EVCO S.p.A. EVX 800 range | Installer manual ver. 1.2 | Code 144X800E124
page 31 of 66
6. Press and release the BLAST CHILLING key or do not operate for 15 s: the display will show “- - - -” flashing for
4 s and the HACCP LED will switch off, after which the device will automatically exit the procedure and the
display will show the magnitude indicated in paragraph 5.3 “The display”.
If the device has not memorised any information relative to the HACCP alarms, the “rLS“ label will not be displayed.