EVCO EVX815P7 Installer manual - Manual (Page 48)

EVCO S.p.A. EVX 800 range | Installer manual ver. 1.2 | Code 144X800E124
page 48 of 66
10 SIGNALS AND INDICATIONS
10.1 Signals
The following table illustrates the meaning of the signalling LEDS.
LED Meaning
Blast chilling LED.
If it is on:
- blast chilling in progress.
If flashing:
- a blast chilling and storage cycle will have been selected.
Deep freezing LED.
If it is on:
- soft deep freezing will be in progress.
If flashing:
- a soft deep freezing and storage cycle will have been selected.
HARD
Hard blast chilling/deep freezing LED
If it is on:
- hard blast chilling or deep freezing will be in progress.
If flashing:
- a hard blast chilling and storage cycle or a deep freezing and storage cycle will have been
selected.
Temperature-controlled blast chilling/temperature-controlled deep freezing LED.
If it is on:
- a temperature-controlled blast chilling and storage cycle or a temperature-controlled deep
freezing and storage cycle will have been selected.
- temperature-controlled blast chilling or deep freezing will be in progress.
If flashing:
- the verification test for the correct insertion of the needle probe will not have been completed
successfully
- needle probe heating will be in progress.
Time-controlled blast chilling/time-controlled deep freezing LED.
If it is on:
- a time-controlled blast chilling and storage cycle or a time-controlled deep freezing and storage
cycle will have been selected.
- time-controlled blast chilling or deep freezing will be in progress.
If flashing:
- setting the real date and time will be in progress (in EVX812 and EVX815 modes only).
Storage LED.
If it is on:
- storage will be in progress.