Ecler EDRIVE600 Podware - Manual (Page 13)

50-0169-0100 F01-08 F02-08 EDRIVE 600B EDRIVE 600 Podware.doc 13
Device Properties
By selecting Device>Properties from the menu (see Menus), or by selecting Properties from the Device
Context Menu (see Device Context Menu), a dialogue will be shown listing some properties for the
selected device (See The Selected Device). These are as follows:
Model Name:
The Model Name/Number the type of device is usually known as (e.g. “VXD123”)
Device Name:
The name given to this particular device by the user (e.g. “Left fill”).
This can usually be changed in a control panel, or in the Device Context Menu.
(see Device Context Menu)
Settings Name:
The name given to the current set of parameter settings (e.g. “Bright vocal”)
Firmware Model:
A number describing the type of software running in the device.
Firmware Version:
The version number of the firmware so you can tell if you have the latest.
See Device Firmware.
Handle:
A 4-digit hexadecimal number which will uniquely identify this device on a network
Link Address:
A hexadecimal number which the network will use for addressing this device.
Hardware Version:
A number representing a variant of the hardware build of a given device type. This is
rarely of concern to the user, but you may be asked to quote this value when discussing a
problem with your dealer.
When you have finished with the dialogue, just click the Done button.