Storm control – Comtrol ES9528-XT User Guide User Manual
Page 67
RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G
Storm Control - 67
Configuration Using the Web Interface
Storm Control
The Storm Control is similar to Rate Control. Rate Control filters all the traffic over the threshold you input
by the user interface. Storm Control allows you to define the rate for specific Packet Types.
Storm Control Page
Rate Configuration
Broadcast Rate
(Kbits/sec)
Broadcast rate limit range from 0 to 100000 Kbits/sec,
zero means no limit.
DLF Rate
(Kbits/sec)
Destination lookup failure rate limit range from 0 to
100000 Kbits/sec, zero means no limit.
Multicast Rate
(Kbits/sec)
Multicast Rate (Kbits/sec): Multicast rate limit range
from 0 to 100000 Kbits/sec, zero means no limit.
Port Configuration
Port
Port identifier.
Broadcast
To enable or disable broadcast storm control on the
corresponding port.
DLF
To enable or disable destination lookup failure storm
control on this port.
Multicast
To enable or disable multicast storm control on this port.
Apply
Click Apply to apply the settings. It may take some time
and the web user interface may become slow, this is
normal condition.
Note: You must Save the settings (
), if you want
to maintain these settings if the ES9528 is
powered off.