Comtrol ES9528-XT User Guide - Manual (Page 155)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Network Redundancy (CLI) - 155
Configuration Using the Command Line Interface (CLI)
Redundant Ring
Create or
configure a Ring
Switch(config)# redundant-ring 1
Ring 1 created
Switch(config-redundant-ring)#
Note: 1 is the target Ring ID which is going to be created or configured.
Super Ring
Version
Switch(config-redundant-ring)# version
default set default to Redundant ring
rapid-super-ring rapid super ring
super-ring super ring
Switch(config-redundant-ring)# version rapid-super-ring
Priority
Switch(config-redundant-ring)# priority
<0-255> valid range is 0 to 255
default set default
Switch(config-redundant-ring)# super-ring priority 100
Ring Port
Switch(config-redundant-ring)# port
IFLIST Interface list, ex: fa1,fa3-5,gi25-28
cost path cost
Switch(config-redundant-ring)# port fa1,fa2