Comtrol ES9528-XT User Guide - Manual (Page 65)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Port Status - 65
Configuration Using the Web Interface
Port Status
The Port Status page displays the current port status.
Note: The web user interface can display the vendor name, wave length and distance of all Comtrol Gigabit
SFP transceivers. If you see Unknown information, it may mean that the vendor doesn’t provide their
information or that the information of their transceiver can’t be read.
Port Status Page
Type
100BASE-TX displays for Fast Ethernet copper ports
1000BASE-TX displays for Gigabit Ethernet Copper ports
1000BASE-X displays for Gigabit Fiber Ports
Link Shows link status; Up means the link is up and Down means that the link is down.
State
Shows the port state. If the state is enabled it displays Enable. If the port is disabled or
shutdown, it displays Disable.
Speed/Duplex Current working status of the port.
Flow Control The state of the flow control.
Scan All Click the Scan All button to scan for all SFPs.