Comtrol ES9528-XT User Guide - Manual (Page 105)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G MAC Filter (Port Security) - 105
Configuration Using the Web Interface
Once you finish configuring the MAC settings, click Add to apply your configuration.
The following example shows:
• Permit Source MAC address from 00c0.4e33.0000 to Destination MAC 00c0.4e33.0002.
• The Permit rule is egress rule and it is bound to fastethernet Port 2.
Once you finish configuring the settings, click Apply to apply your configuration.
Note: You must Save the settings ( Page 124 ), if you want to maintain these settings if the ES9528 is powered
off.
Wildcard Bit
Number of
Allowances
Note
Any 1111.1111.1111 All
Host 1 Only the source or destination
0000.0000.0003 0000.0000.000(00000011) 3
0000.0000.0007 0000.0000.000(00000111) 7
0000.0000.000F 0000.0000.000(11111111) 15
....