Comtrol ES9528-XT User Guide - Manual (Page 169)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Multicast Filtering (CLI) - 169
Configuration Using the Command Line Interface (CLI)
IGMP Query (Continued)
Display
Switch# sh ip igmp
interface vlan1
enabled: Yes
version: IGMPv2
query-interval: 125s
query-max-response-time: 10s
Switch# show running-config
….
!
interface vlan1
ip address 192.168.250.17/24
ip igmp
no shutdown
!
…….
Unknown Multicast
Send Unknown
Multicast to Query
Ports Switch(config)# ip igmp snooping source-only-learning
IGMP Snooping Source-Only-Learning enabled
Send Unknown
Multicast to All Ports
Switch(config)# no ip igmp snooping source-only-learning
IGMP Snooping Source-Only-Learning disabled
Switch(config)# no mac-address-table multicast filtering
Flooding unknown multicast addresses ok!
Discard All Unknown
Multicast
Switch(config)# mac-address-table multicast filtering
Filtering unknown multicast addresses ok!