Comtrol ES9528-XT User Guide - Manual (Page 103)

RocketLinx ES9528 and ES9528-XT User Guide: 2000508 Rev. G Security - 103
Configuration Using the Web Interface
Security
The ES9528 provides several security features for you to secure your connection. The following pages are
included in this group:
• Filter Set (Access Control List)
- MAC Filter (Port Security) on Page 104
- IP Filter on Page 106
- Filter Attach on Page 108
• 802.1x Configuration on Page 109
• 802.1x Port Configuration on Page 110
• 802.1x Port Status on Page 112
Optionally, you can use the CLI for configuration, see Security (CLI) on Page 172.
Filter Set (Access Control List)
The Filter Set is known as Access Control List (ACL) feature. There are two major types:
• MAC Filter (Port Security) on Page 104, which is called Port Security in other RocketLinx switches. It
allows you to define the access rule based on the MAC address.
• IP Filter on Page 106, which is called IP security in other RocketLinx models and supports the IP
Standard access list, and advanced IP based access lists.
You can use Access Control Entry (ACE) to define a Permit or Deny rule for specific IP or MAC address, or IP
groups by network mask in each ACE. One ACL may include several ACEs. The system checks the ACEs one
after another and forwards the data based on the result.
If the rules conflict, the oldest entry is selected.
To define rules using the MAC Filter, click MAC Filter, and type the Name. To define rules using the IP Filter,
click IP Filter, and type the ID/Name. The ID for the IP access list is listed as below of the field.
Click Add to add the rule. Click Edit to edit the contents of the rule. After configuring the rules, click Apply to
apply all the rules. Click Reload to reload setting and Remove to remove one of the entries.