RCA Flat Panel Television - Manual (Page 16)

C^iiiiiiectioiiis & Set«p
Set the Menu Language
Press the right arrow button, then press OK to select English and contintie to
the next step, Press the down arrow button to choose another language, then
press OK to continue,
Tip
The first Channel Search can take up to 20 minutes if
the TV is searching for analog and digital channels,
and cable and antenna inputs are being searched.
You may want to leave and come back later.
Complete the Channel Search
Even thoiigh tliis initial channel search can take several minutes, yoit must
complete it in order for your W to display channels and programming
information. Make sitre you’ve connected your W to cable or an ofbair
antenna before you begin the channel search.
All the options are selected for you to ensure a full channel search is
completed. Press the right arrow button. An alert, screen appears to allow
you to start a channel search or customize the options.
Press OK to start a chatinel .search or if you want to change some of the
options, use the arrow buttons to highlight those options. Press OK to check
or uncheck an option. Then highlight Suv/i Search
and press OK. to start the
channel search.
When the c:han.nel .search is complete a me.ssage screen appears. Press OK to
contintie.
Notes: If you skip Channel Search now, you can access it later
through the Channel Setup menu. For more detailed instructions, refer
to Chapter 4 of the Users Guide.
Choose Setup Options
Quick Startup is a pow'er saving featitre, SeJect to enable or disalale Quick Startup. Decide
which option is best for you. Enabling Quick Startup allows you to turn on the W faster than if
disabled.
Several more screens appear that give you basic tips about using your lA'. Read through the
information and continue to pre.ss OK itntil the sci'eens disappear.
Note: When you disable Quick Statiup it adds approxiniately 30 seconds to ibe lY's turn
on time.
16
Chapter 1