Setting up your tv, Remote control buttons used for the assisted setup, Complete the assisted setup – RCA Flat Panel Television User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting Up Your TV
•
Plug in the W.
Note: Woen you fmt plug your TV into an outlet, the Power indicator on the front panel
will light and blink for approximately
30
seconds and then go off during the initialization
of the IV. Ibis happens only when the TV is unplugged and plugged back in. Tioe IV can
only he turned on after the Power indicator goes o f f .
•
Put batteries in the remote.
•
Turn on the W.
Use these buttons during the Assisted Setup
Tip
To access the initial setup menus at a later time,
press
MENU, choose Setup Options, then Assisted Setup.
Remote Control Buttons Used for the
Assisted Setup
To use the TV’s menus, first press the TV burton on the remote control to put
the remote in IV mode, When the Assisted Setup screen appears, use tlie arrow
buttons to highlight oiae of the items listed in the menu. Use the tip or down
arrow button to move up or down. lUe the right or le.ft arrow button to move
right or left.
To select the item that you’ve highliglued, press OK,
Note: Highlighted means that the menu item stands out from, other
inenu items on the list (appears darker, brighter, ora ciifferent ccAor).
Complete the Assisted Setup
Your dV’s menu system allow^s yoit to customize your IV’s features, On-screen,
infonrration helps you choose settings to match your setup. The first time you
turn on. your lYc the Assisted Setup screen appears automatically. Press OK to
begin the setup.
Chapter 1