Toshiba MA-136-100 SERIES - Manual (Page 8)

Numeric Display
AMOUNT (8 digits)
DPT (2 digits)
RPT (1 digit)
Displays the numeric data, such as amount, quantity,
etc.
Dispalys the code which represents each Department Key.
It stays lit when repeating the same department entry.
Displays the repeat department entry count.
PLU (2 digits, commonly used with the DPT)
Displays the PLU code when any PLU is entered. It goes
out when repeating the same PLU entry.
Message Descriptors
SLP
ALM
REG
(-)
Lights up when a slip has been properly inserted to allow
validation.
It flashes to require a slip insertion when validation
compulsion is programmed on a transaction key.
Lights up with the alarm buzzer to indicate that the last
operation or numeric entry has resulted in an error. To clear
the erroneous condition, depress the key.
Lights up when sale items have been entered into a department.
Lights up when the
I
RTN MDSEI, iDOLL DISC
I
, [%-], or
I
ITEM CORK
I
key has been operated.
It also lights up when the (STj or one of the total keys has
been depressed and the displayed amount is negative.
TXBL
ST
TL
CG
SHORT
Lights up when a taxable department or PLU is entered.
It also lights up with the 'ST* Lamp when the iTXBL TL 1 key
is depressed.
Lights up when the sub-total amount is displayed after the
key has been depressed.
Lights up on a finalizing operation with the total amount
displayed when finalized without any amount tendered.
When an amount tendering operation has been performed, this
lamp lights up with the change due displayed.
Lights up when the amount tendered is less than the sale total
with the shortage amount displayed.
- 4 -