Toshiba MA-136-100 SERIES User Manual
Page 31
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NOTES: 1. Among ITXI/Ml iITX/
m
I). and ITX27
m
I keys, depress the key(s)
for the required status change(s) for each department.
The
1RTN MDSË1 is depressed to set or reset the negative DEPT
status.
2. Depressing any of the three keys above, the related status
reverses. For example, depressing the ITX/Ml reverses a non-
taxable DEPT to a taxable, or taxable to non-taxable. Each
department status is read by the number indicated on the
display when each department key is depressed in the above
operation. The numbers and their respective statuses are:
0; Non-taxable
1 : Tax
1
only
2: Tax
2
only
3: Tax
1
and Tax
2
Watching the number, adjust the status by depressing those
keys. See the examples below:
STATUS
BEFORE
NUMBER_^
CHANGE
KEY-IN FOR CHANGE
PRIOR TO iDEPT 1 KEY
-
NEW NUMBER AND
STATUS OBTAINED
0
ITXI/MI
KTaxl only)
0
1 TX17
m
I 1 TX2/M1
-*
3(Taxl and Tax2)
0
ITX2/MI
2(Tax2 only)
etc.
1
1
txi
7
m
1
0{Non-taxable)
1
ITX2/MI
3(Taxl and Tax2)
1
ITX
i
7
m
1ITX2/MI
2{Tax2 only)
etc.
2
1TX2/M1
0(Non-taxable)
2
|TX1/M|
3(Taxl and Tax2)
3
ITXl/Ml
2(Tax2 only)
etc.
.3. In order to simplify the status setting operation, each depart
ment status may be reset to *'0" by entering "0" and depressing
the department key in the above operation. (This can only
be done after a PLU reset as well as an AUTO SCAN reset.)
Then the required status is set simply by depressing the keys
ITXI/
m
I {i TX/MI) and/or ITX2/MI, each only once .