Toshiba MA-136-100 SERIES - Manual (Page 32)

SETTING OR CHANGING DEPARTMENT PRESET PRICE (Condition: anytime outside a sale)
Mode Lock: SET Key Operation
I New Preset Price]
max. 6 digits
1 DEPT I ^ i AT/TL i
Repeat for all the
required departments.
NOTES:
1. To preset the price of "0",
enter "0" in place of the
price entry in the above
operation.
2. If no price is entered in
the above operation, the
department is set as an open
department.
PROGRAMMING PLU TABLE (Condition: after a PLU RESET-to renew the PLU table,
or anytime outside a sale to program
additional PLUs)
Mode Lock: SET Key Operation
3] [X] ^ iPLU Code! ^ [PUT]
'max.2 digits
(1-50)
[Preset Price] [Link DEPT I -»I AT/TL1
max.6 digits
---- To program another PLU -----------------
NOTES: 1. No PLUs can be programmed to link a negative department.
2. A maximum of 50 PLUs may be programmed.
3. The PLUs that have not been programmed v/ith a preset price
in the above operation are automatically set as PLUs with
the preset price of "0".
4. The tax status of each PLU is automatically determined
by the status of the linked Department.
CHANGING PLU PRESET PRICE (Condition: anytime outside a sale)
Mode Lock: SET Key Operation
[PLU Code! -V ГРиЛ [New Price] Ц] [ a T/TL'I
max.2 digits max. 6 digits
(1 - 50)
— To change the price of another PLU
NOTE: In this operation, changes of link departments, programming
additional PLUs, etc. are not possible.