To change the reserved contents, When timer operation is not required, To set the same timer program again – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 70
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UD-7D3/753 (En]
Ensure that the power is OFF
Check the reservation content
[
Each press of the key swftches the program numbers as follows.
PROG.1
(Contents of the program 1 are displayed.)
PR0G.2
(Contents of the program 2 are displayed.)
Normal mode
•The reserved contents will be displayed for 3 seconds per item. After this,
the previous display content appears again.
To change the reserved contents
Restart the procedure of "Timer programming" from the be
ginning.
When timer operation is not required
Each press of the key switches the program numbers as follows,
r*-
PRQG.1
(Only the program 1 is carried out.)
PROG.2
(Only the program 2 is carried out.)
PROG.1 2
(Both programs 1 and 2 are carried out.)
Timer OFF (No timer operation is carried out)
•The reservation contents are held in memory.
To set the same timer program again
Each press of the key switches the program numbers as i
r*- PROG.1
(Only the program 1 is carried out.)
PROG.2
(Only the program 2 is carried out.)
PROG.1 2
(Both programs 1 and 2 are carried out.)
Timer OFF (No timer operation is carried out)
• Also prepare the disc or tape and adjust the listening volume.
I
[ Note
I
The reservation contents cannot be cleared. The contents are cleared only when they are changed.