Fmde-emphasis/channel space switch – Kenwood COMPACT DISC DIGITAL AUDIO UD-703 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connection of antenna adapter (UlC^ and Europe only)
FMDE-EMPHASIS/CHANNEL SPACE switch
(Except for U.SA, Canada U.K. Europe and Australia)
The FM DE-EMPHASIS/CHANNEL SPACE switch on the rear panel is set
to the correct setting that prevails in the area to which the unit is shipped.
However, if the FM DE-EMPHASIS/CHANNEL SPACE setting is not
matched to the area where the unit is to be used; for instance, when you
move from area 1 to area 2 or vice versa, desired reception of AM/FM
broadcasts is not expected. In this case, change the FM DE-EMPHASIS/
CHANNEL SPACE setting in accordance with the area corresponding to the
table. The FM DE-EMPHASIS is switched over at the same time.
•
• When changing the setting of the FM DE-EMPHASIS/CHANNEL SPACE
switch, first disconnect the power cord, then reset the channel space
switch, connect the power cord again, and turn the power on.