Cisco 5000 Series - Manual (Page 123)

S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m
C-3
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Appendix C Cable and Port Specifications
Console Cable
• 12 M4 x 0.7 x 8-mm Phillips countersunk screws
• 10 10-32 rack nuts
• 10 10-32 x 3/4-inch Phillips countersunk screws
• 1 console cable with an RJ-45-RS-232 adapter and a DB9 adapter
• 1 ground lug kit
• 1 ESD wrist strap
• 1 power cord clip ( a wire clip that is used to retain the power cord). Figure C-2 shows how to attach
a power cord to the switch.
Figure C-2 Attaching the Power Cord clip to the Cisco Nexus 5010 Switch
Note Additional parts can be ordered from your customer service representative.
Console Cable
Note This section applies to the Cisco Nexus 5548 switch, the Cisco Nexus 5020 switch, and the Cisco Nexus
5010 switch.
The console cable has a RJ-45, RS-232 connector on one end and a DB9 connector on the other end. See
Figure C-3 .
236719