Cisco 5000 Series - Manual (Page 93)

S e n d c o m m e n t s t o n 5 k d o c s @ c i s c o . c o m
3-29
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Chapter 3 Installing the Cisco Nexus 5500 Platform or 5000 Series Switch
Removing and Installing Components
This section includes the following topics:
• Installing a Fan Module, page 3-29
• Removing a Fan Module, page 3-30
Installing a Fan Module
To install a fan module, follow these steps:
Step 1 Hold the fan module with the LED at the bottom.
Step 2 Place the fan module into the front chassis cavity so it rests on the chassis, and then push the fan module
into the chassis as far as it can go and the captive screw makes contact with the chassis, and tighten the
captive screw. See
Figure 3-17 Fan Module for the Cisco Nexus 5548 Switch
Figure 3-18 Fan Module for the Cisco Nexus 5020 switch
236716
186596