Cisco 5000 Series - Manual (Page 48)

S e n d d o c u m e n t a t i o n c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
2-16
Cisco Nexus 5000 Series Hardware Installation Guide
OL-15902-01
Chapter 2 Cisco Nexus 5000 Series Overview
Cisco Nexus 5020 Switch
Supported SFP Transceivers
The Cisco Nexus 5020 switch supports both SFP+ Ethernet transceivers and SFP Fibre Channel
transceivers.
This section includes the following sections:
• SFP+ Transceivers, page 2-16
• SFP+ Copper Cables, page 2-16
• SFP Fiber Channel Transceivers, page 2-17
SFP+ Transceivers
The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit Ethernet transceiver module is a
bidirectional device with a transmitter and receiver in the same physical package. See
Table 2-4 . It has
a 20-pin connector on the electrical interface and duplex LC connector on the optical interface.The Cisco
Nexus 5020 switch supports the SFP-10G-SR transceiver.
Table 2-4 SFP+ Transceivers
Figure 2-18 shows the SFP-10G-SR transceiver.
Figure 2-18 SFP+ 10-Gigabit Ethernet Transceiver Module
SFP+ Copper Cables
Copper cables are available for use with the 10-Gigabit Ethernet SFP+ module. See Table 2-5 . The
cables come in the following lengths:
• 1m, 30AWG
• 3m, 28-30 AWG
Model Description
SFP-10G-SR 10-Gigabit Ethernet—short range SFP+ module
187492