Cleveland Range OVEN STEAMER - Manual (Page 90)

What to do if ...
?
84
Error Message on display Possible cause Remedy
Water tap closed Open water tap
Solenoid valve dirt filter contaminated Remove and clean filter
E01 Not enough water
Solenoid valve fault Call customer service
E02 Connection area
temperature too high
Connection area ventilation fault
Air supply blocked
Allow Combi to cool, or continue
cooking at a lower oven
temperature, and call customer
service
Motor temperature monitor triggered,
external failsafe triggered Call customer service E03 Fan malfunction
Fan motor fault Call customer service
E04 Connection area fan
malfunction
Auxiliary fan fault Call customer service
E05 No gas Gas supply interrupted Open gas valve
Excess oven temperature Call customer service E11/E21 Excess temperature in oven
or oven sensor failure
Oven sensor fault Call customer service
E13/E23 Excess temperature in
steam generator or steam
generator sensor failure Steam generator sensor fault Call customer service
Water tap closed Open water tap
Excess temperature in condenser via
hot water connection Connect appliance to cold water,
restart
Solenoid valve dirt filter contaminated Remove and clean filter
Solenoid valve fault Call customer service
E15/E25 Excess temperature of
condenser or condenser
sensor failure
Condenser sensor fault Call customer service
E22 Core temperature sensor
fault Core temperature sensor fault Set cooking mode with time,
and call customer service
E24 Bypass sensor failure Bypass sensor fault Call customer service
E26 Steam generator safety
temperature limiter sensor
failure Safety temperature limiter sensor fault
in steam generator Call customer service
E27 Excess temperature of
steam generator heater Steam generator dirty Descale
E29 Ground connection of sensor Temperature sensor fault Call customer service
E33 Steam generator heater error Steam generator heater fault Call customer service
E34 Steam generator pump error Steam generator pump fault Call customer service
E80/E95/E96 ID error / software error /
connection fault Control fault Call customer service
E82 Working parameter error Problems during switch between °C / F Check settings in Cookbook or
check °C/F in settings
Cleaner canister or nozzle rinsing fluid
agent empty Fill canister Low agent
pressure! No cleaner pressure
Pump fault Call customer service