Cleveland Range OVEN STEAMER - Manual (Page 60)

Cooking with Convotherm by Cleveland
54
Extra Functions
With Extra Functions, your Convotherm by Cleveland enables you to maximize productivity in the
food preparation processes and cooking processes.
Pre-Set Start Time
A pre-set start time will automatically start the required program, cooking plan or recipe.
1. Press and hold down the Time key and turn the Selector Dial
6019002_00
D
.
2. The display will show time details.
3. See Example below.
Explanation of example:
Top: total cooking time of one hour or 1:00 (this value only displayed in time mode).
Bottom Left: the unit will start in 48 minutes (displayed in time and core temperature modes).
Bottom Center: start time 10:23 (displayed in time and core temperature modes).
Bottom Right: end of cooking 11:23 (this value only displayed in time mode).
4. Select the time-to-start start, or end time by holding down the Time key and simultaneously
turning the Selector Dial
6019002_00
D
(in time mode only).
a. The Selector Dial moves the time-to-start in hours and minutes (bottom left), the start time
(bottom center) and the end time (bottom right) simultaneously.
b. Select and set the desired time-to-start, start time, or end time and the other two times will be set
automatically.
5. The Combi will automatically begin counting down to the pre-set start time when the Time key is
released.
6. If a Cookbook program, cooking plan, or recipe is counting down to its start time, then “PROG:” and
the name of the program will appear in the display above the time information.
7. To change the pre-set start time, press and hold down the Time key .
8. Use the Selector Dial
6019002_00
D
to set the desired time.
9. When the start time is reached, the set program will start automatically.
10. To delete a pre-set start time, press the Start/Stop key . This will delete the pre-set start time.
Recommendations:
•
Use the Extra Functions to avoid bottlenecks in food preparation and production.
•
Prepare food as normal, load the unit and select the required mode and cooking time or core
temperature before the cooking process needs to start.
Notes:
• Pre-Set Start Time may be used with Cookbook programs, cooking plans, or recipes.
1. Press the Cookbook key .
2. Select the desired recipe with the Selector Dial
6019002_00
D
.
3. Check the steps with the Smart Key if desired.
4. Proceed with Step 1 as usual.