Carl Goldberg GBGA0067 - Manual (Page 11)

WING CONSTRUCTION
1. ‡ Gather the parts needed to construct the wing:
(2) D/C SHT. 6725 5/64” BALSA PT. # 3656
CONTAINS WING RIB #3
(2) D/C SHT. 6714 5/64” BALSA PT. #3688
CONTAINS WING RIB #4 & #5
(2) D/C SHT. 6715 5/64” BALSA PT. #3689
CONTAINS: WING RIB #6 & 7,
AND AILERON RIB
(2) D/C SHT. 6716 5/64” BALSA PT. #3690
CONTAINS: WING RIB #8, #9,
#10, AND AILERON RIB
(1) L/C SHT. 6732 PLY PT. #3652
CONTAINS: WING JOINER FRONT
WING JOINER REAR,
WING DOWEL SCAB PLATE
(1) L/C SHT. 6730 BALSA PT. #3654
WING CENTER RIB
(2) L/C SHT. 6731 PLY PT. #3653
CONTAINS: RIB #2, RIB #2 TAB,
WING CENTER DOUBLER
(1) D/C SHT. 6726 PLY PT. #3658
CONTAINS :
(1) RIB SPACING GAUGE
(2) WING BOLT PADS
(2) D.C SHT. 6718 BALSA PT. #3692
CONTAINS:(8)SHEAR WEB
(4) D/C SHT. 6719 5/64” BALSA PT. #3693
CONTAINS:
(2) WING TIP SHEETING
(1) AILERON SERVO COVER SHEETING
(4) WING CENTER SHEETING
(4) D/C SHT. 6720 5/64” BALSA PT. #3694
CONTAINS:
(2) WING CENTER SHEETING
(2) D/C SHT. 6722 5/64” BALSA PT. #3695
CONTAINS:
(2) WING TIP SHEETING
(2) AILERON SERVO COVER SHEETING
(1) D/C SHT. 6723 PLY PT. #3697
CONTAINS:
(2) AILERON SERVO MOUNT
(8) DIHEDRAL FIXTURES
(5) MAIN SPARS PT. #3700
(3/8 x 3/8 x 35-1/8" BASS)
(8) AFT SPARS PT. #3701
(1/8 x 1/4 x 35-3/4" BALSA
(4) HINGE STICK PT. #3702
(1/4 x 1 x 25-1/2" BALSA)
(2) WING TIP BLOCK PT. #3703
(1-1/4 SQ x 10" BALSA)
(1) T.E. BACK-UP PT. #3704
(1-3/4 TAPERED x 7" BALSA)
(2) SHAPED L.E. PT. #3705
(12) WING SHEETING PT. #3706
(4) CAPSTRIPS PT. #3707
(5/64 X 1/4 X 22" BALSA)
(1) LANDING GEAR PLATE PT. #3708
(1/4 x 2-1/4 x 6-1/4" PLY)
(1) NYLON TAPE PT. #3709
(4) #6-32 x 1" SOCKET HD. SCREW PT. #1023
(4) #6 WASHER PT. #1140
(10) LARGE FLEX-POINT HINGE PT. #1449
(1) WING DOWEL PT. #1750
(5/16 x 4-1/2" ASH)
(1) BEVEL TOOL “A” PREVIOUSLY CON-
STRUCTED.
11