Preparation (setting parameters) – A&D Weighing HW-1200KGV3 User Manual
Page 44
Page 42
HV-G/HW-G Series
12. Full/Dribble Batch Function
12.1. Preparation (Setting Parameters)
Step 1 Turn off the display.
Press and hold the
ZERO
key and press the
ON/OFF
key.
The function table is displayed.
Step 2 Press the
ENTER
key to display an item of the
comparator function (
f6
).
Step 3 Select a parameter of the full/dribble batch function
(
f6 9
) with the
∧
key.
Step 4 Press the
ENTER
key to store the new parameter and
display an item of the full/dribble batch sub-function
(
f10
) .
Step 5 Select a parameter of the full/dribble batch
sub-function (
f10 0
to
f10 3
) with the
∧
key.
Step 6 Press the
ENTER
key and the
F
key to display end .
Step 7 Press the
ENTER
key to return to the normal weighing
mode.