A&D Weighing HW-1200KGV3 - Manual (Page 23)

HV-G/HW-G Series Page 21
6. Description of Each Part
D isplay and Symbols Description A
Calibration error
The calibration mass is too heavy.
Check the base unit and the weighing pan.
A
A
A
A
Does not display zero when the scale is turned on.
Remove anything that is on the weighing pan.
Perform zero point calibration.
Or
The weight value is unstable due to drift or vibration
when the scale is turned on.
A breeze or vibration may be affecting the
measurement.
Check around the weighing pan. A
A
A
A
Accumulated data count
A
A
Total mass value of the accumulated data
A
A
Comparator function: upper limit value
Full/dribble batch function: final value A
A
Full/dribble batch function: preliminary value
A
A
Comparator function: lower limit value
Full/dribble batch function: zero band A
A
e.g. CAP. MAX. 3/6/15kg d=1/2/5g
The weighing range and measurable minimum mass.
Example: Displays the weight value by 5 g up to 15 kg.
Displays the weight value by 2 g up to 6 kg.
Displays the weight value by 1 g up to 3 kg.
A
A
6.2. Keys
Display and Symbols Description A
ON/OFF key
Note Type V is in standby status when power is connected.
A
A
A
ZERO key
When the
ZERO key is pressed with nothing on the pan, the
scale displays the mass value of zero and the zero point mark.
Net is canceled, if it is displayed.
A
A
A
A
TARE key
Canceling the mass of a container which is placed on the pan
and does not weigh its mass.
A
A
A
SAMPLE key, RANGE key, key
Changes the weighing range for HV-G series.(Refer to
f2 )
Storing the unit mass: used to select the number of samples.
A
A
A