KEYENCE TM-3000 Series - Manual (Page 13)

13
VII -
22
Excel transfer function
XXX
Displaying the storage data on the Excel file
Procedure
The storage data has been stored on the controller.
This loads the storage data to the Excel file using the setup support software TM-Navigator.
Connect the controller (TM-3000) and the computer using the
supplied USB cable and start the setup support software
TM-Navigator. Perform the following operation with the stored
data on the controller.
Click the “Data storage” button.
Click the “Read storage data” button on the data storage
window.
Click the “Excel transfer start” button.
The Excel setting window appears.
Enter the data to transfer and the “Forward sheet name” on the
Excel setting window.
Click the “Transfer” button.
The data is transferred as shown at right.
Data
measurement
date
OUT1
measurement
value
OUT2
measurement
value
1
3
2
4
5
1
2
3
4
5