KEYENCE DL-PD1 - Manual (Page 51)

3-6 DP-V1 Service
3-29 - PROFIBUS DP Compatible Network Unit DL-PD1 User's Manual (IG) -
Execu
ting Communi
cat
ion
3
*1Functions assigned to the external input request 1 to 5 are as follows:
• External input request 1: Zero shift input
• External input request 2: TIMING input
• External input request 3: RESET input
• External input request 4: Standard waveform input
• External input request 5: Laser emission stop input
Refer to the IG series user's manual.
*2 If the judgment value is correct, the parameter range is -99.997 to +99.998.
• When the comparator value is over range, "+99.999" is stored.
• When the comparator value is under range, "-99.999" is stored.
• When the comparator value is invalid, "-99.998" is stored.
• When an error occurs, "+100.000" is stored.
• When reading data from a main unit in which the calculation function is set to 2-
head mode, the read range changes to "-999.99 to +999.99".
160
Comparator value 0 (ID
Number 1)
Used when reading
comparator value (P.V. value)
of ID number 01.
*2
4byte
DINT
R
-99.999 to +99.999 : : : : :
174
Comparator value 0 (ID
Number 15)
Used when reading
comparator value (P.V. value)
of ID number 15.
*2
4byte
DINT
R
175 Reserved for system
176
Number of decimal places
(Current value 0, ID
Number 1)
Used when reading the
decimal position of ID number
01 comparator value (P.V.
value).
4byte
DINT
R
: : : : :
190
Number of decimal places
(Current value 0, ID
Number 15)
Used when reading the
decimal position of ID number
15 comparator value (P.V.
value).
4byte
DINT
R
191 Reserved for system
192 Setting error
When the sensor amplifier
setting is abnormal, the
corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
193 EEPROM writing
When the sensor amplifier is
reflecting the setting after the
setting change, the
corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
194 Laser emission stop status
When the light emission of
the sensor amplifier stops,
the corresponding bit is set.
2byte
WORD
R
bit0 : Reserved for system
bit1 : Slot 1
:
bit15 : Slot 15
Index
(DEC)
Function name Description
Data
type
Attribute Value