Cub Cadet T2-HP - Manual (Page 30)

26 T2 ®
reduCTIOn Gear seT
Refer to Figure 18
disassembly
Reduction Gear Set:
1 . Remove all external items previously dis-
cussed in their recommended order .
2 . Remove the washer (93), jack shaft gear
(91) and reduction gear (90) .
3 . Remove the jack shaft (92) and second
washer (93) .
Inspection
1 . Inspect all items of the reduction gear set
for wear or damage .
assembly
1 . Reassemble all parts in the reverse order
of disassembly .
2 . Install the washer (93) and jack shaft (92) .
3 . Install the jack shaft gear (91) into the re-
duction gear (90) . Insert onto the jack shaft
(92) .
4 . Place the washer (93) onto the jack shaft
(92) .
figure 18, reduction Gear set
1
90
92
93
93
91