Cub Cadet T2-HP - Manual (Page 20)

16 T2 ®
NOTE: It is necessary to remove the T2 ® from
the vehicle before performing the repair
procedures presented in this section.
Before starting any disassembly, make
certain that your work area is neat and
clean. Clean the external parts of the
transaxle.
The following procedures are pre-
sented in the order recommended for a
complete tear down of the transaxle.
figure 7, T2 Transaxle
TransaXle remOVal
Do not disassemble the unit any far-
ther than necessary to accomplish the
required repairs.
Reassembly is accomplished by per-
forming the “Assembly” portions of the
procedures. If the unit has been com-
pletely disassembled, a summary of
the assembly procedures, in the order
in which they should occur, is given on
page 34.