Cabletron Systems 2H23-50R - Manual (Page 146)

Chapter 5: Local Management
5-96 2H23-50R/2H33-37R User’s Guide
5.26.3 Using the Clear Counters Command
To reset all the statistics counters of the selected port to zero, perform the
following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS command
field at the bottom of the screen.
2. Press ENTER. The counters for the selected port are reset to zero.
5.27 NETWORK TOOLS
The Network Tools function allows the user to access and manage
network devices.
Figure 5-34 shows the Network Tools help screen.
To access the Network Tools screen, use the arrow keys to highlight the
NETWORK TOOLS menu item in the Device Menu screen and press
ENTER. The Network Tools screen displays.
Figure 5-34 Network Tools Screen
The Network Tools functions are performed using a series of commands.
Entering commands in Network Tools involves typing the command to be
executed at the Network Tools prompt, adding any desired or required
extensions, and pressing ENTER.
-> help
090829
arp
netstat
show traceroute
defroute
ping reset
bridge
SPECIAL:
done, quit, or exit - Exit from the Network Tools.
For help with a specific command, type 'help '.
->
Commands Available to User
Built in Commands:
Welcome to Network Tools
soft_reset telnet link_trap
atm_stp_state