Cabletron Systems 2H23-50R - Manual (Page 136)

Chapter 5: Local Management
5-86 2H23-50R/2H33-37R User’s Guide
MTU (Read-Only)
The MTU field displays the maximum frame size (in octets) that a frame
may contain to be received or transmitted from this interface.
Speed (Read-Only)
The Speed field displays the theoretical maximum of the interface’s
bandwidth in bits per second.
Link Status (Read-Only)
This field displays the current link status of the interface. This field
displays either “Link” or “No Link”.
Duplex Mode (Read-Only)
This field indicates whether the interface is operating in normal (standard)
or full duplex mode. This field displays either “Standard” or “Full
Duplex”.
Interface [ nn] (Command)
This command is used to enter an interface number for viewing statistics.
For instructions on how to use this command, refer to
Section 5.24.1 .
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this field, refer to
Section 5.24.2 .
5.24.1 Displaying Interface Statistics
To display the statistics for any interface, proceed as follows:
1. Use the arrow keys to highlight the Interface [nn] field at the bottom
of the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key to
decrement) the interface number.
3. Press ENTER (neither the Interface # fields nor the statistics change
until ENTER is pressed).