Cabletron Systems 2H23-50R - Manual (Page 145)

Repeater Statistics Screen
2H23-50R/2H33-37R User’s Guide 5-95
Admin Status (Read-only)
Indicates if the network or port is enabled (Enabled) or disabled
(Disabled).
NETWORK # (Command)
This command is used to select a particular Network to view its statistics.
When the Network is selected the statistics are also displayed for the first
port in the Network under Port #. For details, refer to
Section 5.26.1
PORT # (Command)
This command is used to select a particular Port to view its statistics and
those of its associated Network. For details, refer to
Section 5.26.2 .
CLEAR COUNTERS (Command)
This command sets all statistics counters to zero. For details on how to
use this command, refer to
Section 5.26.3 .
5.26.1 Displaying Network Statistics
To display the statistics of any Network, proceed as follows:
1. Use the arrow keys to highlight the NETWORK # command field at
the bottom of the screen.
2. Press the SPACE bar to increment or press the BACKSPACE key to
decrement the port number.
3. Press ENTER (the NETWORK #, the first PORT # of the Network,
and the associated statistics do not display until ENTER is pressed).
5.26.2 Displaying Network Port Statistics
To display the statistics for any repeater port, proceed as follows:
1. Use the arrow keys to highlight the PORT # command field at the
bottom of the screen.
2. Press the SPACE bar to increment or press the BACKSPACE key to
decrement the port number.
3. Press ENTER (the PORT #, the NETWORK # of the associated
network, and the statistics do not change until ENTER is pressed).