COP-USA DVR2508-FD - Manual (Page 57)

DVR User Manual
51
6.1.6 Record Information
In this tab, a user can check resolution, ftp and record status including sensor based recording, motion based recording, manual
recording or schedule recording.
6.2 Manual Alarm
In this interface, user can trigger a manual alarm.
6.3 Disk Management
1. Format the disk
Step1: Enter into disk management tab.
Note: Please format the hard disk before recording. If not formatted, it will show the status of the disk-free space, and total space at the bottom of
screen.
Step2: Click Refresh button to refresh the disk information in the list box;
Step3: Select a hard disk and click Format button to start format.
Note: All recorded files in the hard disk will be lost once it is formatted.
2.
Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the temperature, internal
circuit, dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data.
6.4 Upgrade
The DVR can be upgraded by using USB flash drive. Get the upgrading software from your vendor when there is a new software
version.
Upgrade Steps:
Step 1: Copy the upgrade software which gets from vendor into the USB storage device