1 basic configuration – COP-USA DVR2508-FD User Manual

Page 26

DVR User Manual

Fig 4-2 Main Menu

4.1 Basic Configuration

Basic configuration includes three sub menus: system, date & time and DST.

4.1.1 System

Step1: Enter into MenuSetupBasicSystem. Refer to Fig 4-3:
Step2: In this interface you can setup the device name, device ID, video format,
max network user, VGA resolution and language. The definitions for every
parameters display as below:
Device Name: The name of the device as it may display on the client end or on
CMS, this would help the user to recognize the device remotely.

Device ID: This ID is used to map the DVR with IR remote controller and speed
dome cameras.
Video Format: Two modes: PAL and NTSC. User can select the video format
according to the cameras being used.
Password Check: If enabled the user would need to input the user name and the
password for performing corresponding operations. Fig 4-3 Basic Configuration-Basic
Show System Time: If selected, displays the current time during live monitoring.

This manual is related to the following products:

DVR2516-FD