COP-USA DVR2508-FD User Manual

Page 32

DVR User Manual

Post-alarm record: Set the post recording time after the alarm is finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s
and 300s.
Expire time: The time till which the records would be retained. If the set date is overdue, the recorded files will be deleted
automatically.
Step2: Select “All” to setup all channels with the same parameters.
Step3: Click “Apply” to save the setting; click “Exit” to exit the current interface.

4.3.4 Stamp

Stamp

：This provides an option to enable or disable the Camera Name and

the Time stamp on the video. You can also choose a position for the stamp on
the screen.
Step1: Enter into MenuSetupRecordStamp tab. Refer to Fig 4-14:
Step2: Checkmark camera name and time stamp; click Setting button. User
can use cursor to drag the camera name and time stamp at random positions.
Refer to below Figures:
Step3: Select “All” to setup all channels with the same parameters.

Fig 4-14 Record Configuration-Stamp

Before Drag After Drag

This manual is related to the following products:

DVR2516-FD