COP-USA DVR2508-FD User Manual
Page 31

DVR User Manual
25
Step2: Checkmark record and audio.
Step3: Select All to setup the same settings for all channels.
4.3.2 Record Bitrate
Step1: Enter into MenuSetupRecordRecord Bitrate tab. Refer to Fig 4-12:
Fig 4-12 Record Configuration-Record Bit rate
Step2: Setup rate, resolution, quality, encode and max bit stream
Step3:
Click “Default” button to restore default setting; Click
“Apply” button to save the setting; click “Exit” button to exit the
current interface.
4.3.3 Time
Step1: Enter into MenuSetupRecordTime tab. Refer to Fig
4-13:
Pre-alarm record time: The record time prior to actual triggering
of an alarm i.e. record time before motion detection or a sensor
alarm was triggered. Fig 4-13 Record Configuration-Time
Parameter
Meaning
Rate
Range from: 1-30
(NTSC)1-25(PAL)
Resolution
Support CIF, HD1 and D1
Quality
The higher the value is, the clearer the
recorded image is. Six options: lowest,
lower, low, medium, higher and highest.
Encode
VBR and CBR
Max
bit
stream
Range from: 64 Kbps, 128 Kbps, 256 Kbps,
512 Kbps, 768 Kbps, 1Mbps, 2 Mbps