COP-USA DVR2508-FD - Manual (Page 35)

DVR User Manual
29
4.4.3 Sensor
This tab allows to setup schedule for sensor based recording.
Step1: Enter into MenuSetupScheduleSensor tab. Refer to Fig
4-18:
Step2: The setup steps for schedule for sensor based recording are
similar to normal schedule setup (Refer to 4.4.1 Schedule for details).
Note: The default schedule of sensor based recording is 24x7, that is, the color
of schedule settings interface is dark blue. This enables sensor based recording
for 24x7. If you want to activate sensor based recording, you must enable
sensor alarm and setup schedule for sensor alarm (Refer to Chapter 4.5.1 for
more details).
Fig 4-18 Schedule Configuration-Sensor
4.5 Alarm Configuration
Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.
4.5.1 Sensor
Sensor includes three sub menus: basic, alarm handling and schedule.
Operate the following steps to configure sensor alarm:
Step1: Enter into MenuSetupAlarmSensorBasic tab. Refer to Fig
4-19:
Step2: Enable channels by checking the checkboxes beside the desired
channels.
Step 3: Set the alarm type according to triggered alarm type. Two option:
NO and NC.
Step4: Click “Apply” button to save settings.
Step5: Enter into Alarm Handling tab. Refer to Fig 4-20. Fig 4-19 Alarm Configuration-Sensor-Basic