2 hardware installation, 1 install hard drive &dvd writer – COP-USA DVR2508-FD User Manual
Page 10
DVR User Manual
4
2 Hardware Installation
Notice: Check the unit and the accessories after getting the DVR.
Please don’t power up the unit till the physical installation is complete.
2.1 Install Hard Drive &DVD Writer
2.1.1 Install Hard Drive
Notice: 1. This series support eight SATA hard drives. Please use the hard drive the manufacturers recommend specially for security and safe
field.
2. Please calculate HDD capacity accordin
g to the recording setting. Please refer to “Appendix B Calculate Recording Capacity”.
Step 1: Unscrew and open the case and then unscrew the screws in the both sides to take out of the upper iron bar as shown
below:
Step 2: Put the HDD under the l
ower iron bar and let the screw holes of the HDD aim at the iron bars‟. Then screw firmly and
connect the power and data cables. The pictures are shown as follows: