BUCHI Inert Loop B-295 - Manual (Page 14)

2 Safety
14 B-290 Operation Manual, Version I
! NOTICE
Risk of instrument damage by wrong mains supply.
• External mains supply must meet the voltage given on the type plate
• Check for sufficient grounding
2 .5 .2 Warning labels on housing and assemblies
The following warning sticker(s) can be found on the housing or assemblies of the Mini Spray Dryer
B-290 and Inert Loop B-295:
Symbol Meaning Location
Do not touch
hot item, hot
surface!
Label, located at the spray cylinder,
B-290
See text Sticker at the rear side, B-290
See text Sticker/label, located on the B-295
2 .5 .3 Personal protective equipment
Always wear personal protective equipment such as protective eye goggles, protective clothing and
gloves. Wear protective mask to protect from inhalation of fine particles. The personal protective
equipment must meet all requirements of all data sheets for the chemicals used. These instructions
are an important part of the instrument and must be made available at all times to the operating
personnel at the place where the equipment is deployed. Additional protective measures can
be necessary according to the applications! The user is fully responsible for choosing adequate
measures!