Carrier Container Refrigeration Unit - Manual (Page 52)

3-35 62-02575-07
8. Point of Destination
9. Discharge Date
10.Trip Comment
Daily Data: Each Day will have a record with the following data:
1. Main Setpoint at the start of the day
2. Sensor Data
3. Event Data
Some days may require more than one record, if there is a lot of sensor data, or the recording format changes. The data
display screen supports the following options, to move through the file:
1. Page Up
Go up one page
2. Page Down Go down one page
3. Up Arrow Go up one line
4. Down Arrow Go down one line
5. Home Go to the top of the report
6. End Go to the bottom of the report
7. F1/ALT--1 Help
8. F3/ALT--3 Next Report
9. F7/ALT--7 Print -- Allows the user to setup the reports to send to the printer. Displays the Print Data Screen.
10.F10/ALT--0 Print Direct -- Sends the selected view reports to the printer using the current printer settings. The
formatted reports are sent to the printer. If the Raw report is selected with any of the formatted reports (i.e., graphic,
sensor, event, or summary), only the formatted reports are printed. The Raw report will not be printed. The user
must select the Raw report type only for this feature to print the Raw report.
11.ESC Exit
12.M More
13.ALT--G Graphic Data
14.ALT--T Sensor Data
15.ALT--E Event Data
16.ALT--S Summary Data
ALT--R Raw Data