Carrier Container Refrigeration Unit - Manual (Page 23)

3-6 62-02575-07
Go -- Allows the user to start the RAW to DCX file conversion. The following steps are processed:
1. The Raw File Conversion screen is cleared.
2. The File Processing popup is displayed.
3. Each file in the current directory is checked to verify if it is a RAW formatted file. If not, it skips this file and checks
the next file.
4. Each RAW formatted file found within the current directory is converted to the DCX format and stored in the work-
ing directory with the same filename and the new file extension, “.DCX.”
If a problem occurs while converting the RAW file to a DCX formatted file, a message box is displayed with the failed
file and describing the problem. The program will end and return to the MS--DOS prompt.
TOPIC 5 MICRO - LINKS SELECTION SCREEN
This section describes the features available on the Micro-Links selection screen.
The Micro-Links selection screen will be displayed when the DataView program is started without being connected to
the Recorder. The user is allowed to select which program to run: the Micro-Link 1 or Micro-Link 2/2i. The following
screen is displayed when the program starts up.
The following is a summary of the options available to the user:
Micro-Links -- Allows the user to select which program to execute;
1. Micro-Link 1 -- CTD2.exe Interrogation program for the Micro-Link 1 units.
2. Micro-Link 2/2i. -- DataView Interrogation program for the Micro-Link 2/2i units.
Go -- Starts the selected program.