Panasonic OMNIVISION PV-DM2791 - Manual (Page 59)

Settings for DVD Operation
1 Press ACTION in Stop mode to display
MAIN MENU.
saECT> ▼ ^ ►
END ¡ACTION
1) Press ► to
select “DVD.”
2) Press SET to display
screen.
DVD MAIN MENU
SEI.ECT
SET
£N0
1) Press
AT
to select
an item.
2) Press SET to set.
DISC LANGUAGES (See below.)
Any languages offered on the disc can be set. If a language
not offered is set, the original disc language will be selected.
AUDIO OUTPUT (See page 60.)
You can set the audio output that comes from the digital
audio output terminal.
STILL MODE (See page 61.)
To select “FIELD" or “FRAME" to prevent jitter or to make
small text or fine patterns clearfy visible in a still picture.
When “AUTO" is set “FIELD” or “FRAME” is selected
automatically.
TV MODE (See page 61.)
To select whether the video material for a wide-screen will
be played back in Pan & Scan style or in Letterbox style.
DISC LANGUAGES (DVD only)
To select and set the language of the audio soundtrack,
subtitles, or title/DVD menus for all discs to be played.
4 DVD MAIN MENU
^ 1 ) PrOSS
AT
to se ect
“DISC LANGUAGES.”
QTII I >Aiirrt
2) Press SET to display
screen.
SELECT
SET
END
DISC LANGUAGES
'
□Х0ШЯНИ1|П|ЕЕ1
i>UyiiTl£ iMTtO
MENUS tEngllch
SELECT
SET :SET
END FACTION
1) Press
AT
to select
an item.
2) Press SET
repeatedly for
desired language.
(Please refer right.)
Press ACTION to redisplay DVD menu
and go to step 3 to setup another item.
Or, press ACTION three times to exit.
Once initial settings are done, they remain
in memory (even after power off) until
changed. This means the unit will always
operate under the same conditions
(especially DVDs) each time.
O' Ready Checklist
□ Unit is in TV-VCR mode, press v B r .
“AUDIO” selections
To select the audio soundtrack language,
(factory preset: English)
Engllsh/Spanish/French
Original: Original disc language
OTHER
Other language selection*'
“SUBTITLE” selections
To select the subtitle language.
(Factory preset: AUTO)
AUTO: Same language selected for
“AUDIO”
• If language set for “AUDIO”
is used in playback, subtitles
will not appear.
• If another language is used
during playback, the subtitles
will appear in the language
selected at “AUDIO” setup.
Engllsh/Spanish/French
OTHER
Other language selection*'
“MENUS” selections
(factory preset: English)
To select the language used in title
menus or DVD menus. i
English/Spanish/French i
OTHER Other language selection*'
To enter OTHER ♦*** code number,
Press number keys (Please refer to
language codes on page 65).
To make corrections, press
repeatedly to delete language code
number, and correct.
*' If the selected language is not offered,
the original disc language is selected.
59