Panasonic OMNIVISION PV-DM2791 - Manual (Page 23)

MTS Broadcast/TV Stereo System
Equipped with dbx* -TV Noise
Reduction for true MTS
reproduction, dbx* -TV Noise
Reduction is required for good
stereo separation and audio fidelity,
dbx* is a registered trademark, and
is licensed by dbx* Technology
Licensing.
< Example >
Receivable Broadcast Types
The following are possible audio broadcast types and
on-screen displays. The signal being received is indicated
with an “ t " mark while the selected audio mode is indicated
with an arrow. To change the audio mode for these
broadcasts, see the “Select Audio Mode for TV Viewing"
section (below.)
Press DISPLAY to display
the broadcast signal being received.
MTS stereo and SAP broadcast
Multi-channel Television Sound Stereo
(man language) and Secondary Audio
Pr^ram (sub language) broadcasts are
being received simultaneously.
Select the STEREO or SAP audio mode.
*STEREO •
► SAP
MONO
STOP 12:00AU ABC
0;00;00
•STEREO- SP
SAP
UONO
STOP 12 :00AM ABC
0:00:00
STÈBEO SP
►SAP *■
MONO
STEREO
SAP
MONO -
MTS Stereo broadcast
Multi-channel Television Sound Stereo
broadcast. Select STEREO audio mode.
• If stereo broadcast is weak and the
display flickers, select MONO audio
mode for possibly better results,
SAP broadcast
Secondary Audio Program
(sub language).
Select SAP audio mode for the sub
language.
MONO broadcast
Normal monaural sound broadcast.
Audio Mode for TV Viewing
Press AUDIO to select the desired audio mode
as described above.
(Arrow shows selection.)
• Each press of AUDIO will change the audio mode as shown
below.
• “SAP" is selected with first press of AUDIO,
23