Copy your tapes (dubbing), Connections you’ll need to make, Recording (editing) unit – Panasonic OMNIVISION PV-DM2791 User Manual
Page 19: Insert blank tape with record tab, Select “line” mode, Selecting input mode, Playing (source) vcr recording (editing) unit
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Copy Your Tapes (Dubbing)
.Important: If a remote control button does not work
when pressed, press the
vcb
button on
the remote and try the button again.
Connections you’ll need to make
Playing (Source) VCR
Recording (Editing) unit
OJTG-i
IN
O
R-AUDIO-L VIDEO
* IN FROM
® ANT.
A-
Playback (Source)
1
Insert pre>
recorded tape.
1
...... ^ 4
Recording (Editing) unit
Insert blank tape
with record tab.
Dubbing tapes protected
with Copy Guard will have
poor quality results.
Select “LINE” mode.
See “Selecting Input Mode” below.
Press PLAY then
PAUSE at starting
point to put in
Standby mode.
Press REC, then
Press STILL/PAUSE
immediately to put in
Standby mode.
— (Perform operation of steps 4 and 5 on both units at same time.) —
Press PLAY
to start dubbing.
Press STILLPAUSE
to start dubbing.
Press STOP
to stop dubbing.
Unauthorized exchanging and/or
copying of copyrighted recordings
may be copyright infringement.
Please note that some tapes
cannot be dubbed on this unit.
Also, it is not possible to dub
DVDA/ideo CD/CD to VHS tape
using this unit.
Press STOP
to stop dubbing.
Selecting Input Mode
Method 1:
Press CH
AT.
The display will change as follows.
I
UNI
(CABLE) (TV)
—►125 or 69
Method 2:
^
line
a Press ACTION
for MAIN MENU,
b Press
AT^ ► to select “TV”, then
press SET
for SET UP TV screen,
c Press
AT
to select “INPUT SELECT," and
then
press
SET to select TUNER" or “LINE.”
d Press ACTION
twice to exit this mode.
D
19