Panasonic OMNIVISION PV-DM2791 - Manual (Page 53)

‘Important: If a remote control button does not work when pressed, press the vcr , DVD button on the remote
■and try the button again.
Program Play (Video CD/CD)
You can program specific tracks and order of play.
1 Press ACTION in Stop mode to display
MAIN MENU.
1) Press AT^ ► to
select “DVD.”
2) Press SET to
display screen.
3 DVD MAIN MENU
DISC languages
AUDIO OUTPUT
STILL MODE :FIEL3
TV MODE :L«tterbox
SELECT : A ▼
SET fSET
END ¡ACTION
1) Press AT to select
“PLAY MODE."
2) Press SET to
display screen.
A PLAV UOOE
1) Press AT to select
4
“PROGRAM PLAY.”
2) Press SET to
display screen.
SET :SET
end ¡ACTION
1) Press ► to
select a track
number.
(Track numbers on
disc are displayed.)
2) Press SET to set.
Repeat step 5 to select another track.
The selected track is added on the right side.
PROGRAM PLAY
DISC P
D 11
2 7 12 17 1
3 8 13 10
4 9 14 19
5 10 IS 20
CLEAR LAST
CLEAR ALL
safer t A ▼ ^ »
SET :SET
END : ACTION
PROGRAM PLAY
DISC PROGRAM
D 6 n 10 5 8
2 7 12 17 15 6
3 6 13 10 1 13
4 9 14 19 3 2
5 10 IS 20 2
CLEAR LAST
CLEAR MX.
SELECT tA ▼
SET :SET
END t ACTION
4 ►
0
^
Ready Checklist
□ Unit is in TV-VCR mode, press
□ Video CD or CD is inserted.
Program Repeat Play
(Video CD/CD)
Do steps 1 through 6 on
this page.
Press DISPLAY to display
Disc Information screen.
(Disc Information Screen)
NEXT: DISPLAY
Press DISPLAY again to
display Unit Information screen.
Press SET to enter Select mode.
(“REPEAT OFF" will flash.)
(Unit Information Screen)
1) Press AWM ► to
select “START.”
2) Press SET to start
play of programs in the
sequence selected.
• To cancel, press STOP
during play, then press
CLEAR.
• Up to 15 tracks can be programmed.
• ” or “ (depending on disc) indicates additional
PROGRAM PLAY screen. Press ATM ► for next or
previous screen.
• To clear the last program one by one,
Press ATM ► to move to “CLEAR LAST and press
SET. (Pressing CLEAR also clears last program.)
• To clear all programs,
Press ATM ► to move to “CLEAR ALL” and press SET.
(Programs are also cleared when the power is turned off or
the disc is removed.)
e Press AT to
REPEAT.”
select "DISC
REPEAT.’
(Unit Information Screen)
f Press SET to set mode.
(“DISC REPEAT’ stops
flashing.)
To cancel, select “REPEAT
OFF” in step e, then press
SET.
53