Panasonic OMNIVISION PV-DM2791 - Manual (Page 14)

Initial Setup
When the unit is turned on the first time, setup
mode is entered automatically.
Press vgf, on the remote for TV-VCR mode.
Process of Setup
lo
Language EaChannelEg Clock
1
Press POWER* on the remote or unit.
SELECT UNGUAGE
PRESS CH A :EneH sh
OPRIMIR CH ▼ :EBpaflol
APP, VOL + :Français
OR
Press CH T to select Spanish
(Español).
OR
Press VOL+ to select French
(Français).
If wrong language is set, complete “Reset all unit Memory
Functions” steps on page 15.
If you use a cable box, it must be left on.
CHANNEL/aOCK ADÍO SET
CONKECT ANTENNA CABLE
AMD IF YOU USE A CABLE
BOX, TUNE IT TO YOUR
LOCAL PBS CH THEN, , .
PLEASE PRESS CH UP IÆY
Press CH A to start
CHANNEL/CLOCK
AUTO SET operation.
{}_________
[ CH AUTO SET PROCEEDING ]
AUTO CLOCK SET
PROCEED I NO
«
[Setup completed)
21 7/2001 WED 12:OOPH
DST:ON
SETTING : CH 10
AUTO CLOCK SET
COMPLETED
END ; PRESS CH UP KEY
Press CH A to exit.
If your area observes daylight
saving time, but you would like
to turn the DST feature off,
set DST: OFF (see "Clock" on
pages 16 and 17).
[Setup Incomplete]
AUTO CLOCK SET
IS INCOMPLETE
PLEASE SET CLOCK BY
PRESSING ACTION KEY
If time is not correct...
even though your area observes daylight
saving time and DST is set to ON, do
“Time Zone Adjust" steps on page 17.
See next page.
- C H A
-VCL +
CHT
IMPORTANT NOTE FOR AUTO CLOCK SET
• Auto clock set is performed the first time the unit is turned off each day. If used, a cable box must be left
on and tuned to the PBS channel at the time the unit power is turned off if you want auto clock set to be done.
• If using a DSS receiver, it must be turned off for auto clock set.
• If a Cable Box or DSS receiver is connected to the unit via Audio/Video Jacks, an RF coaxial cable
must also be connected for auto clock set and channel auto set features.
• If for any reason the time is changed manually, automatic time correction wilt not occur.
14
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to ; [email protected]