Unit decoder with doiby digitai ampiifier speaker, Dts (digital theater systems), Caution for optical digital audio – Panasonic OMNIVISION PV-DM2791 User Manual

Page 13: Note, Optical digital audio cable (optional)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

■ Unit Decoder with Doiby Digitai Ampiifier Speaker

dtS

(digital theater systems)

When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or dts bitstream

is output from the unit Optical digital audio output connector. When the unit is connected to a

Dolby Digital decoder or dts decoder, you can enjoy theater-quality audio in your home.
[An optical digital audio cable (optional) is required when an optional Dolby Digital decoder or
dts decoder is used.]

Notes on connecting an Optical

digital audio cable (optional)

• Remove dust protection cap from

Optical digital audio output. Firmly

connect the cable to the connector.

• Always reattach the dust protection

cap when connector is not in use.

Dust protection cap

Caution for optical digital audio

output connector:
• When connecting an amplifier (with

an Optical digital input connector)
which does not contain the Dolby

Digital or dts decoder, be sure to

select “OFF” at “Dolby Digital” and
“OFF” at “dts” of the Settings for

DVD Operation “AUDIO OUTPUT’

(see page 60). Otherwise, any

attempt to play DVDs may cause
such a high level of noise that it may

be harmful to your ears and damage

your speakers.

• When a dts decoder is connected,

please select “Bitstream” at “dts" of

the Settings for DVD Operation
“AUDIO OUTPUr. If “OFF” is
selected, there will be no sound.

(See page 60).

• Video CDs and CDs can be played

as normal.

Note:

• Some dts decoders which do not

support DVD-dts interface may not
work properly with the unit.

Optical digital audio

cable (optional)

To optical digital audio

input connector

Decorder with Dolby Digital/

dts processing (optional)