Panasonic OMNIVISION PV-DM2791 - Manual (Page 41)

timporlant: If a remote control button does not work when pressed, press the vcp button on the remote
and try the button again.
Ix^Readv Checklist
□ It is necessary to enter TV mode by
pressing v ^ r before selecting “CH” on the
MAIN MENU.
Remote Warning Feature
When Universal Remote Control (page 32) is
used, and this feature is set to “ON," a warning
appears whenever an invalid key is pressed in
DSS or Cable mode.
1
Press ACTION
to display MAIN MENU.
1) Press ► to
select ‘TV.”
2) Press SET to
display SET UP
TV screen.
SET UP TV
CAPTION
INPUT SELECT : TUNER
SET UP AUDfCWlOEO
FM ANTENNA
: I NT
‘AKER :ON
^ON
SET t SET
STAMP
1) Press Af to
select REMOTE
WARNING.
2) Press SET to
set “ON” or
“OFF.”
“REMOTE WARNING : OFF”
Remote warning will not appear even if
invalid key is pressed.
4 Press ACTION twice
to return to normal screen.
SELECT:* T ► SET:SET
END :ACTION
Weak Signal Display Feature
When “ON’ is selected, the picture is displayed even
when a broadcast signal is weak or non-existent.
1 Press ACTION
to display MAIN MENU.
1) Press ATM
► to select
“CH "
2) Press SET to
display SET
UP CHANNEL
screen.
1) Press AT to
select WEAK
SIGNAL
DISPLAY.
2) Press SET to
set “ON” or
“OFF.”
• “ON” = Picture is displayed regardless of
signal condition, and may not
always be clearly visible.
“OFP= Screen turns solid blue when
signal is absent or weak.
• If unit is connected to equipment which
has blue back feature, selecting “ON” will
have no effect on the other equipment. ■
4 Press ACTION twice
I
to return to the normal screen.
I
SET UP CHANNEL
NNA : CABLE
BMiesb IXBildd
SELECT:* *
SET t SET
END lACTION
VCR Lock
All operations are prohibited except Timer
recording and tape eject. Useful for families
with small children.
In Stop mode, hold
down REC on the
unit without a
cassette inserted for 7
seconds to turn “ON."
more “NO
VCR LOCK ACTIVATED
warning.)
Repeat above with or
without cassette to
turn “OFF.”
VCR Lock is canceled automatically
after about 24 hours if clock is set.
41