Tape operation (continued), Repeat play, To turn “on – Panasonic OMNIVISION PV-DM2791 User Manual

Page 36: Repeat above to select “repeat off, Zero search, Press counter reset at the, Desired position to reset to “0:00:00, Press stop, Press cm/2ero in stop mode to start zero search

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Tape Operation (continued)

Repeat Play

Set to see a recording over and over.

PWY

REPEAT OK

To turn “ON,”

press PLAY/REPEAT

on the unit

repeatedly in Play mode to select

“REPEAT ON”.
To turn “OFF,”

repeat above to select “REPEAT OFF.”

♦ Playback repeats when tape end is

reached or unrecorded portion over 30

seconds is detected.

For repeat play in DVD mode, see page 57,

Zero Search

To quickly return to a specific tape counter location.

Press DISPLAY*

during playback

to display the Counter.

Press COUNTER

RESET

at the

desired position to

reset to “0:00:00.”

Continue playback, rewind, or

fast forward.

Press STOP.

Press CM/2ERO

in stop mode to

start ZERO SEARCH.

• Unit goes into FF or REW mode and

stops at the last point the Counter was
set to 0:00:00.

PLAY/REPEAT